FAQ Sho-Me Touchless boat cover

120048024_10164087428480177_4456366015665211674_n (1).jpg

60 seconds to the fun

Remote Operated

Fully automated, The Touchless Boat Cover® protection system can operate independently with any boat lift. By the simple use of a remote and press of a button, the cover will smoothly lower over your boat. It’s that easy!

Warranty

Color Selection

Top Gun Fabric: Easy to clean marine grade fabric. Fabric has UVA threading sealed with a polymeric coating which provides protection from outdoor exposure and is abrasion resistant. Available in 10 stock fabric color choices and 10 special order colors.
Marine Grade Frame: Frames available in both “Gator Shield” coated, galvanized steel and 6061 marine grade aluminum. Our frames are customized for any application from rivers and lake waters to brackish and ocean water.
Motor: Marine grade, fully sealed, outdoor, zero maintenance, remote controlled or phone app upgradable motor available in A/C and D/C models.
Ventilation Mesh: Maximum-flow ventilation system provides substantial airflow around the entire perimeter of the boat. This breathable feature allows your boat to completely air dry and not trap in moisture.
Zipper: Easy release zipper for ease of install or uninstall, for seasonal storage.
EZ Lace: Attaches fabric to framework acting as reinforcement fabric binding. Provides extra fabric support for high wind resistance and easy access to tighten zip ties.
Retraction System: Aircraft, marine grade, stainless steel cables are used to evenly gather fabric while the lower frame raises and lowers. Fiberglass rods installed in the fabric offer additional internal skeletal cover support and enhanced gathering.
Pulleys: Stainless steel pulleys with quick release sheaves.
Binding: Stylish acrylic binding for protection and high end finish.
Riser: Customizable built-in post used to support the cover where no support is available.
Angle Bracket: Heavy duty adjustable bracket for large overhangs greater than 3 feet.
Grommeted Holes: Customized drain hole placement on each cover allowing rainwater to drain.
Boot / Tower: Custom cavity design for additional coverage customized for Towers, T-tops and Bimini Tops. Boat accessories are tucked up inside of boathouse rafters maximizing the height the boat can be raised in the boat house for complete protection.
Boat Lift Cables: Our covers are custom designed to work with any existing boatlift cable and existing pilings.
Cable Holes: Openings are custom fit for cover to allow boat lift components to pass through cover.
Segmented Zipper Openings: Custom zipper openings can be installed at any desired location for access to boat lift components, lights, or overhead storage.

QUALITY IS BUILT INTO EACH TOUCHLESS BOAT COVER
The Touchless Boat Cover® has a patented product design that uses a unique retraction system engineered to provide both convenience and lasting protection to your boating experience. All Touchless Covers feature distinctive qualities that make our covers the most demanded boating accessory for everyone. Our unique frame designs are strong and durable in lake, river, brackish, and ocean waters. All of our covers feature marine grade, UVA protecting “Top Gun” fabric designed for a wide range of geographical climates.

Each cover order is a unique custom design. Your boat, boat lift, dock, and/or boathouse, are measured personally on your dock by a factory authorized dealer, then sent to be constructed by our manufacturing team.

Why do FAQs matter?

FAQs are a great way to help site visitors find quick answers to common questions about your business and create a better navigation experience.
What is an FAQ section?

An FAQ section can be used to quickly answer common questions about your business like "Where do you ship to?", "What are your opening hours?", or "How can I book a service?".
Where can I add my FAQs?

FAQs can be added to any page on your site or to your Wix mobile app, giving access to members on the go.
How do I add a new question & answer?

To add a new FAQ follow these steps: 1. Manage FAQs from your site dashboard or in the Editor 2. Add a new question & answer 3. Assign your FAQ to a category 4. Save and publish. You can always come back and edit your FAQs.
How do I edit or remove the 'Frequently Asked Questions' title?

You can edit the title from the FAQ 'Settings' tab in the Editor. To remove the title from your mobile app go to the 'Site & App' tab in your Owner's app and customize.
Can I insert an image, video, or GIF in my FAQ?

Yes. To add media follow these steps: 1. Manage FAQs from your site dashboard or in the Editor 2. Create a new FAQ or edit an existing one 3. From the answer text box click on the video, image or GIF icon 4. Add media from your library and save.
What payment methods do you accept?

We accept various payment methods including checks and bank to bank transfers. Preferred method. For more details, please contact our sales team.
What maintenance is required for the Touchless Boat Cover?

The Touchless Boat Cover requires minimal maintenance. Regularly check for any debris or obstructions that may affect its operation. Periodically inspect the cover for any signs of wear and tear, and a yearly wash is recommended. Contact our support team for any necessary repairs or maintenance services. 833-822-6837
What types of boats can the Touchless Boat Cover be used for?

The Touchless Boat Cover can be custom designed to fit a wide range of boats, including pontoon boats, ski boats, wake boats, and more. Along with SXS's, golf carts, vehicles and RV's Each cover is handmade in the USA to ensure a perfect fit and maximum protection.
What is the Touchless Boat Cover and how does it work?

The Touchless Boat Cover is an automatic boat cover system that allows you to cover and uncover your boat with the push of a button. It eliminates the need for traditional ropes, snaps, or straps, providing superior protection from sun damage, weathering, and other environmental factors.
How is the Touchless Boat Cover installed?

The Touchless Boat Cover is professionally installed by our team orf factory certified authorized dealers. The installation process involves custom fitting the cover to your dock, marina, or dry storage area to ensure optimal protection and convenience.

Factory Certified

Each dealer is factory certified and guaranteed by Touchless Boat Cover® to be the best in their area. Our covers are only installed and serviced by our factory authorized dealers to ensure the top-quality status we hold throughout the boating industry. Our team consists of almost 100 dealers in more than 30 states and is constantly expanding to new areas.

Every dealer we welcome to our team is required to attend a training session at our corporate office located in Orlando, Florida. There, in our state of the art training facility, dealers receive certification through a step-by-step training on how to properly sell, install and service The Touchless Boat Cover®.

60 seconds to the fun

Remote Operated

Fully automated, The Touchless Boat Cover® protection system can operate independently with any boat lift. By the simple use of a remote and press of a button, the cover will smoothly lower over your boat. It’s that easy!

Warranty

Color Selection

Top Gun Fabric: Easy to clean marine grade fabric. Fabric has UVA threading sealed with a polymeric coating which provides protection from outdoor exposure and is abrasion resistant. Available in 10 stock fabric color choices and 10 special order colors.

Marine Grade Frame: Frames available in both “Gator Shield” coated, galvanized steel and 6061 marine grade aluminum. Our frames are customized for any application from rivers and lake waters to brackish and ocean water.

Motor: Marine grade, fully sealed, outdoor, zero maintenance, remote controlled or phone app upgradable motor available in A/C and D/C models.

Ventilation Mesh: Maximum-flow ventilation system provides substantial airflow around the entire perimeter of the boat. This breathable feature allows your boat to completely air dry and not trap in moisture.

Zipper: Easy release zipper for ease of install or uninstall, for seasonal storage.

EZ Lace: Attaches fabric to framework acting as reinforcement fabric binding. Provides extra fabric support for high wind resistance and easy access to tighten zip ties.

Retraction System: Aircraft, marine grade, stainless steel cables are used to evenly gather fabric while the lower frame raises and lowers. Fiberglass rods installed in the fabric offer additional internal skeletal cover support and enhanced gathering.

Pulleys: Stainless steel pulleys with quick release sheaves.

Binding: Stylish acrylic binding for protection and high end finish.

Riser: Customizable built-in post used to support the cover where no support is available.

Angle Bracket: Heavy duty adjustable bracket for large overhangs greater than 3 feet.

Grommeted Holes: Customized drain hole placement on each cover allowing rainwater to drain.

Boot / Tower: Custom cavity design for additional coverage customized for Towers, T-tops and Bimini Tops. Boat accessories are tucked up inside of boathouse rafters maximizing the height the boat can be raised in the boat house for complete protection.

Boat Lift Cables: Our covers are custom designed to work with any existing boatlift cable and existing pilings.

Cable Holes: Openings are custom fit for cover to allow boat lift components to pass through cover.

Segmented Zipper Openings: Custom zipper openings can be installed at any desired location for access to boat lift components, lights, or overhead storage.

​

Factory Certified